9320A075G Delphi DP210 Fuel Injection Pump 2200 RPM 4 Cylinder Perkins 1104C-44T

9320A075G Delphi DP210 Fuel Injection Pump – 2200 RPM, 4-Cylinder Perkins 1104C-44T, Bench-Tested

9320A075G Fuel Injection Pump for Perkins 1104C-44T

If you are replacing a fuel injection pump and you only know the engine model, I recommend checking the number on your original pump before ordering. For the 9320A075G, our product information identifies the pump with the Delphi DP210 system and links it to the Perkins 1104C-44T application. External parts references also associate 9320A075G with the Perkins 1104C-44T and the Perkins 2644H004 family. Because several visually similar pumps can be used on related engines, I do not treat an engine model alone as sufficient proof of compatibility.

Why I Recommend This Pump

• 2200 RPM application reference: our supplied product data identifies the 9320A075G application as Perkins 1104C-44T at 2200 RPM.
• Delphi DP210 fuel-injection system: industry parts references identify 9320A075G as a DP210 pump. The pump is responsible for delivering the required fuel to the engine's injection system.
• Bench-tested before shipment: our supplied company information states that finished fuel-system products are bench tested. For a specific batch, I can provide the available test or inspection information before shipment.

What This Pump Does

A fuel injection pump is not simply a fuel-transfer pump. Its job is to meter and deliver fuel at the required conditions so the downstream injection system can supply the engine correctly. When the pump is worn, contaminated or incorrectly calibrated, the engine may experience hard starting, unstable idle, weak power, excessive smoke or abnormal fuel consumption. These symptoms can also be caused by injectors, fuel supply restrictions, air ingress, sensors or other engine-system problems, so I recommend testing the complete fuel system before replacing the pump.

Main Technical Information

Fitment and Part-Number Cross-Reference

For this product, I recommend using the part number as the primary fitment reference. External catalog and distributor data associate 9320A075G with Perkins 1104C-44T and list related Delphi numbers in the 9320A070G–9320A079G range. Some catalogs also associate the 2644H004 Perkins number with this pump family. Because these references can represent different configurations or revisions, I will confirm the exact number on your original pump before shipment.

• Delphi reference: 9320A075G
• Common related reference: 2644H004 / 2644H004JR
• Engine application identified by multiple parts sources: Perkins 1104C-44T
• One published application reference also identifies Caterpillar 430E and McCormick CX105; these are application references, not a universal fitment statement.

How I Confirm the Correct Pump

If you are not familiar with diesel fuel systems, do not worry. You do not need to identify every technical parameter yourself. Send me the following information and I can check the application with you:

• The part number printed or stamped on your original pump.
• A clear photo of the complete pump, especially the identification plate or markings.
• Engine model and, if available, engine serial number.
• Machine or vehicle model.
• If the pump has already been removed, photos of the mounting side and drive/connection area are useful for a second-level check.

Our Inspection Approach

Before I release a pump for a B2B order, I focus on the checks that matter to the fuel system: external condition, correct part-number identification, sealing condition and bench-test performance where applicable. For remanufactured pumps, the exact refurbishment process depends on the pump condition and the product grade quoted. I do not describe a remanufactured unit as a genuine new Delphi pump unless its provenance and condition support that statement.

New, Genuine, OEM-Packed and Remanufactured: What Is the Difference?

For B2B buyers, these terms should not be mixed together. A genuine new Delphi part, an OEM-packed part, a manufacturer-made replacement and a remanufactured pump are different commercial descriptions. When you request a quotation, I will confirm the actual condition, packaging and source rather than using 'OEM quality' as a substitute for a specific product description.

Typical Symptoms of a Pump Problem

Hard starting or difficult cold start: Fuel pressure or fuel delivery may be insufficient, but the complete fuel system should be tested before condemning the pump.
Rough or unstable idle: Can be related to inconsistent fuel delivery, injectors, air ingress or other engine controls.
Low engine power: A fuel-delivery problem is one possible cause; turbocharger, air intake, injectors and engine condition should also be checked.
Excessive black smoke: Incorrect combustion can have several causes. Check fuel delivery, injectors and air supply together.

B2B Ordering, Packaging and Delivery

• MOQ: The supplied B2B information lists MOQ 1 for 9320A075G.
• Delivery: the supplied product listing states approximately 3–7 working days depending on order and stock; I will confirm the actual lead time in the quotation.
• Packaging: original, neutral or customized packaging can be discussed according to the actual product condition.
• Wholesale: mixed part-number orders can be discussed for broader diesel fuel-system requirements.
• Warranty: warranty period depends on the exact product condition and quotation. Do not assume the same warranty applies to every quality grade.

FAQ

Is 9320A075G a Delphi pump?
The part number is widely catalogued as a Delphi fuel injection pump and as a DP210 pump reference. If you require a genuine Delphi-branded unit, I will confirm the brand, packaging and provenance of the actual item before shipment.
Which engine does 9320A075G fit?
Multiple parts references associate it with the Perkins 1104C-44T application. I still recommend checking the original pump number because similar DP210 pumps can have different part numbers and configurations.
Is 9320A075G the same as 2644H004?
They are associated in multiple aftermarket and parts references, but I do not recommend treating every suffix as automatically interchangeable. Send me the original number so I can confirm the exact version.
Is this pump new or remanufactured?
Both new and remanufactured versions may be available depending on stock. I will state the actual condition on the quotation.
Can I order by engine model only?
I recommend against it. The original pump number is the most useful first reference, followed by engine and machine information.
Can you provide a test report?
If test documentation is available for the quoted batch or remanufactured unit, I can confirm what documentation can be supplied before shipment.