095000-5226 DENSO Common Rail Fuel Injector – Hino 700 E13C OE 23670-E0341

Product Description

The 095000-5226 is a DENSO common rail fuel injector reference associated in multiple supporting parts references with Hino 700 Series applications using the E13C engine. Supporting data links the 095000-5226 family with Hino OE references 23670-E0340 and 23670-E0341, with 23910-1240 also appearing in common-reference listings. Because closely related 095000-522# numbers are used within the same application family, we recommend confirming the exact injector number and OE reference on the original unit before ordering.

Product Snapshot

Application & Compatibility

We use 095000-5226 as a Hino E13C application reference based on multiple supporting parts listings. For a B2B replacement order, we do not confirm fitment from the Hino model name alone. We compare the injector number, OE reference, engine model and, where available, the identification label on the existing injector.

• Confirm the complete injector number on the original part.
• Confirm the engine model and engine code.
• Compare the original Hino OE number with the quoted 095000-5226 application.
• Send a clear label photo when the application or part number is uncertain.
• Confirm the supplied unit's condition: new, aftermarket new, remanufactured or another agreed condition.

Product Gallery

Technical Function

A common rail injector meters and atomizes high-pressure fuel into the combustion chamber according to the engine's injection strategy. Correct injector matching affects fuel quantity, injection timing and spray formation. If an engine shows hard starting, rough idle, smoke, poor power or excessive fuel consumption, we do not assume that the injector is automatically the cause. Fuel pressure, pump performance, rail condition, wiring, ECU control, compression and other engine systems should be checked as appropriate.

DENSO G2 & Calibration Considerations

Supporting reference data identifies the 095000-522# family as a DENSO G2 common rail injector family. Exact calibration and compensation requirements depend on the injector version and engine control system. We therefore confirm the actual supplied injector's marking and calibration information before making a statement about coding or direct installation. We do not promise that every 095000-5226 installation is universally plug-and-play without checking the engine-specific procedure.

Inspection & Quality Control

Before shipment, we identify the injector against the purchase order and quoted part number. Where bench testing is included in the supplied product/QC process, the applicable inspection may cover electrical characteristics, leakage, fuel delivery, injection response and spray performance. We only describe a test as completed when it has actually been performed for the supplied unit or batch and can be supported by QC records.

• Part-number and label identification
• Visual and sealing/interface inspection
• Bench calibration or functional testing where included in the quoted QC scope
• Packaging and labeling verification before shipment

Installation & Diagnosis

A common rail injector should be installed by a qualified diesel technician using the engine manufacturer's service procedure. Before replacement, check the fuel system for contamination and verify the injector reference. After installation, follow the applicable priming, leak-check and ECU/calibration procedure for the engine.

Ordering Information for B2B Buyers

For a quotation, please provide the exact injector number, Hino OE number if available, engine model, vehicle model, quantity, required condition and a clear photo of the existing injector label. This information allows us to match the requested part more accurately and reduce wrong-part shipments.

Product-Specific FAQ

What is DENSO 095000-5226?

It is a DENSO common rail injector reference associated in supporting parts data with Hino 700 Series E13C applications. Final fitment should be confirmed against the original injector number and OE reference.

Which Hino OE numbers are associated with 095000-5226?

Supporting parts references commonly list 23670-E0340 and 23670-E0341, and 23910-1240 also appears in reference listings. Confirm the exact OE number on the original injector before ordering.

Is 095000-5226 suitable for every Hino 700 truck?

No. Hino 700 is a vehicle family rather than a sufficient fitment specification. Confirm the E13C engine and original injector/OE reference.

Does 095000-5226 require injector coding?

Coding or calibration requirements depend on the specific engine control system and injector version. We confirm the applicable procedure rather than making a universal no-coding claim.

Can you supply new and remanufactured injectors?

Yes, subject to stock and quotation. The supplied condition should be stated clearly on the quotation and order confirmation.

Our Technical Responsibility

We are Guangzhou Zhuohang Auto Parts Co., Ltd., a B2B supplier of diesel common rail fuel-system components. Our technical-sales team helps distributors, repair shops and fleet-service businesses verify part identity, application, condition and inspection scope before shipment. We do not represent an aftermarket or remanufactured unit as a genuine DENSO product unless genuine status has been specifically verified.

Warranty & After-Sales

Applicable products are supplied with a 12-month warranty under the stated warranty terms. For a warranty review, we normally request the order reference, part number, installation information, fault description and supporting diagnostic evidence. This information helps us determine whether the issue is related to the injector or another part of the fuel system.

Technical Review

Reviewed by: Product Application & Quality-Control Team

Review scope: part-number identification, application wording, technical description, calibration wording and purchasing guidance

Review date: September 2026

Publication rule: update the page when verified application or product-condition information changes

Brand & Compatibility Disclaimer

DENSO is a trademark of DENSO Corporation. Unless genuine DENSO status is expressly stated and verified for the supplied unit, we do not represent an aftermarket or remanufactured injector as a genuine DENSO-manufactured product. Hino, engine and OE names are used only to identify compatible or reference applications. Final fitment should be confirmed using the complete injector number, engine identification and relevant OE/reference data.